Professional and innovative by design, the Spike Conical Fermenters (CF) provide the highest quality level of fermentation, no matter if you have a full-scale brewery or a space in your garage.
Note: Current lead times on the CF5 is 4 weeks.
Free Shipping for orders over $150
Take Our Quiz
Still not sure what brewing system is right for you? Take our Quiz to find out!Learn More
The Spike conical fermenter line will simplify your Brew Day from start to finish!
- Easy to install lid
- Quick cleaning process
- 2” dump port
Plus an assortment of accessories so you can customize your conical to fit your precise brewing needs.
Each CF lid comes with three TC ports:
Blow Off Port – Dedicated port for an airlock or blow off tube
Hop Port – Dedicated port for adding hops
PRV Port – Dedicated port for your pressure relief valve (PRV)
- 304 stainless steel; 1.2mm (18ga)
- All sanitary welded ports
- Designed for 2.5 to 6 gallon batches
- 7 gallon total capacity
- 15psi working pressure (always use a 15psi pressure relief valve)
- Use for pressure transfers
- Use as a brite tank
- Etched volume markings
- 14" wide by 29¨ tall
- Fully polished finish
- Stainless band clamp for simple lid installation
- Completely removable lid for easy cleaning
- 4" TC modular top port
- Allows for hop additions, temp control coil, top sight glass, etc
- (3) 1.5" TC ports which allow for:
- Blow Off Port – Dedicated port for an airlock or blow off tube
- Hop Port – Dedicated port for adding hops
- PRV Port – Dedicated port for your pressure relief valve (PRV)
- · Huge 2” TC bottom dump with butterfly valves (no more stuck yeast dumps)
- 1.5” TC racking port with butterfly valve
- 1.5” TC sample valve (for taking gravity readings)
- 1.5” TC dial thermometer
cf5 bargain cave conical
when i ordered a bargain cave model i thought it might come with a dent, scuff marks, or other minor flaws. what i didn't expect was missing level markings inside conical. knowing that may not have ordered. in the future you might want to include what is wrong with the bargain models and also a photo . overall still a quality product . Thanks
This thing is great
I love this thing, so easy to clean and more convenient than using buckets. Great build, I did go back and get the extended legs casters and brace after the first use makes it more user friendly, for me. I also wrapped it in 5mm neoprene used my on hand bucket heater under the wrap. That keeps my ferment perfect till it’s complete sitting in my unheated garage. I know they are spendy but the convenience is so much nicer.
Shiny stainless steel
Run Amok Mead now owns 10 of these, and we think they are spectacularly awesome. They’re very well-made, can safely be pressurized, with a relief valve, and they have a dump valve, a racking valve and a sample port. The lids have three 1.5 inch tri-clamp fittings in addition to the central 4 inch port, for whatever you need: blow off tube, gas Manifold, hops additions, you name it. All 10 of ours are on wheels, to help us utilize our small space, and I am 100% certain that my liver will fail before this equipment does. Thanks Spike!
Every Conical Fermenter comes with a standard lid with three 1.5” tri-clamp ports. The ports are specifically designed for a blow off port, hop addition port and a pressure relief valve (PRV) port so you can stay safe when your CF is under pressure.
We weld all our CF fittings right here at our facility in Milwaukee, WI. Why does this matter? It means we have control over our strict quality standards. Most competitor models are welded overseas, so there’s fewer quality and control checks throughout the process. Spoiler alert: Sanitary welds are very important when you’re making something that will eventually be consumed.
A Unitank refers to a fermenter that can ferment and carbonate beer in one vessel. Cut down your carbonation time from 7 days in bottles and kegs to just over 24 hours using a CF Unitank and our carb stone!
Temperature control is crucial to fermentation. Some beer styles can be kept at room temperature, while others need to be kept cooler. The Spike CF line has a temperature control system (the TC-100) which will keep your beer within 1 degree of your fermentation target temperature.
How to Assemble Your Spike Conical
Set up your Spike Conical fermenter in just a few simple steps.
Spike Brewing Conical Unitank
Your next great beer starts with a Spike Conical Unitank. Ferment, brite and pressure transfer all from one tank!
How to Assemble Your Spike Conical Watch Video
Spike Brewing Conical Unitank Watch Video
With over 25 accessories available, there’s no limit to what your Conical Fermenter can do! All accessories come “a la carte” so you can outfit your Conical exactly how you want. It doesn’t make sense for us to guess how you’ll be brewing and charge for accessories you don’t need. Want to pressure transfer to a beer keg? We can help with that! Want to add wheels to move your Conical? Sounds good. Want to… you get the point.
The CF line uses tri-clamp fittings. A tri-clamp fitting uses a gasket and clamp to make a sanitary connection. It is the only connection you’ll find at a professional brewery. They're easy to use, never leak and are considered a standard connection, so almost any accessory can be attached.
The entire lid is easily removable so you can keep the inside (and outside!) squeaky clean.
Half Batch Capable
The racking port, sample port and thermometer port are all low enough to be able to do a full volume batch as well as a half batch. All accessories like the temperature control coil, heating pad, etc., are designed to work with a half batch as well.
Oversized Bottom Port
Our CF’s have an oversized (but arguably necessary) 2” tri-clamp bottom dump port. Due to the pressure being exerted, the odds that this port gets clogged are slim to none.
Add our optional CIP ball to the 1.5” tri-clamp port on your lid and connect that to a brew pump. The pump will spin the ball and power wash your CF, making hand scrubbing a thing of the past!