3 Port Lid

7 reviews
  • 3 Port Lid
  • 3 Port Lid
  • 3 Port Lid

$90.00


Lately we've seen quite a few conical setups that could use a couple additional lid ports. So we did just that; now offering our new 3 port conical lid! 

The new lid with three 1.5" tri-clamps offers dedicated ports for the following:

Blow Off Port – Dedicated port for an airlock or blow off tube
Hop Port – Dedicated port for adding hops
PRV Port – Dedicated port for your pressure relief valve (PRV)

Includes:
-3 Port Flex Lid
-(2) 1.5" Caps
-(2) 1.5" Clamps
-(2) 1.5" Gasket

3 Port Lid Advantages



Customer Reviews
4.9 Based on 7 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
CB
06/13/2021
christopher b.
United States United States
3 Port Lid

Was able to use the 3 port lid on my last batch, fit perfect on the conical. nice having a pressure valve as well as a hop addition port with out having top always change out. Great design!

JG
06/11/2021
Joel G.
United States United States
Another great product from spike

Everything I was expecting

SPIKE 3 Port Lid Review
TL
06/11/2021
Tom L.
United States United States
Sorry to see the old one go...

but it was in the trash soon after I received the new three port lid for my CF-10. I no longer need the cross coupler to get three ports on one--I can dedicate one port to PRV, one to blow off / spunding and one to dry hop additions. What would I change: One of the ports should have been a 2" port as hops have a hard time getting through a 1.5" valve. But it works. I would also have preferred not to have the ports labelled--the brewer decides what each port is used for. This is a huge improvement and I'm happy to have it.

SM
06/11/2021
Scott M.
United States United States
Very functional upgrade

I brewed my first 3 port batch. This change is a serious upgrade over the single port lid. It makes fermenting and dry hopping a breeze. By not having to remove the blow off to dry hop. And coldcrashing is much easier also. I usually put 2-3 lbs of co2 pressure to account for the loss in volume while cooling. Neat upgrade and worth the price.

JW
06/11/2021
John W.
United States United States
3 port lid review

The lid works fine. A couple of comments from my perspective. 1) not sure that the separate prv and blow off ports are necessary. To me the prv is used when the blow off is not, thus the blow off has to be removed. If so, remove and place prv on the same port. 2) I'd rather have a single prv/blow off port and a large pry hop port. The larger dry hop ort to allow for mesh bag dry hop removal, 3) happ to have lids where the gasket fits snug. My previous lids didn't hold the gasket in after they were sanitized. Other brewers I know have had the same issue.