Skip to content

FLEX TC-100 Temp Control Bundle

26 reviews

The TC-100 temperature control bundle manages cooling and heating of your Spike Flex. Included in the bundle is a specially built neoprene jacket with reinforced port holes to ensure a perfect fit, a digital controller with a temperature probe and insulated tubing to all but eliminate cooling losses and prevents cooling lines from sweating all over your floor! Basically, this bundle is a must have.


Learn More
Estimated Total $325.00
Shipping Icon

Free Shipping for orders over $150

Overview

Our TC-100 temp control system will manage both cooling and heating of your Flex. The digital controller's temperature probe inserts into the included thermowell that attaches to the secondary port of the Flex. Also included is a specially built neoprene jacket with reinforced port holes to ensure a perfect fit. Lastly, (and the coolest item) is our special insulated tubing. This reduces tube cooling losses and will prevent your cooling lines from sweating all over your floor during the dog days of Summer!

Cooling: When the temperature in the Flex rises above the set point of the controller, it will turn on the pump submerged in your cold-water reservoir (bucket of ice water, aquarium, glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point.

Heating: When the temperature in the Flex falls below the controller set point the optional heater will kick on warming the unit up to the desired temperature.

Flex TC100 Bundle Parts List

  • Digital temp controller (manages heating and cooling)
  • Insulated tubing
  • Temp control coil 
  • Thermowell 
  • Neoprene Insulated Jacket 
  • Submersible pump 
  • Temp Coil Quick Connect Fittings

Need A Replacement Part?

Head to our replacement part page for help.

Have more questions?

Head over to our FAQ page for quick answers!

Reviews

Customer Reviews
4.8 Based on 26 Reviews
5 ★
85% 
22
4 ★
15% 
4
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
KK
10/28/2022
Kevin K.
United States

Ok but the heating element doesnt heat. Waiting for resolution now. I fully expect it to to be resolved.

FS
05/12/2022
Floyd S.
United States United States

Flex TC-100 bundle

This a great addition and works really wellp

MM
07/16/2021
Michael M.
United States United States

Great bundle to keep fermentation at desired temperature

Fermentation stays within 1 degree of desired temp. I recommend using ice packs in the bucket with cooling water to ensure it stays colder than desired fermentation temp. Waiting for the winter months to try out the heater.

SR
04/16/2021
Steve R.
United States United States

Works very well

I am wrapping up my first fermentation with the TC-100. Basement at about 60 degrees ambient temperature. Kept my lager right at 54 F during primary. Jacked it up to 66 for diacetyl rest. it performed exactly as I expected. I used a bucket of water in a keezer as my cold water source. I think when I go to cold crash, I may need to throw in a fair bit of ice to keep the water cold enough. So, that's a bit of a bummer but, not the fault of the TC-100. Previously, I did a test with just water. I was able to get 5.5 gallons of water up to 89 degrees F with the heating pad. At that time, ambient temp was more like 57F. But, with the heat made by a kviek fermentation that should be good enough. Not sure - but it seems like with the jacket on, I have a harder time getting a signal from my Tilt. Note - I have the pressure manifold on there because I was getting no airlock action despite active fermentation. The Flex+ held pressure with the manifold on. Therefore, I know it was my **** not sealing properly - as I suspected. It's very nicely made. My only potential beef with it is the temperature probe. It just kinda sits in the thermowell. I wish it was held in there a better. I'm using a piece of blue tape to keep it in there. Not a big deal. Just a bit of a bummer.

SPIKE FLEX TC-100 Temp Control Bundle ReviewSPIKE FLEX TC-100 Temp Control Bundle Review
ME
04/08/2021
Micheal E.
United States United States

Very much worth the price

We now have the TC100 for all four CF15's and our Flex+. We began using ice in a cooler which worked well for fermenting the bottom fermenting yeasts. Once we upgraded to a glycol chiller, these things really impressed. Using the Inkbird temp controller (rebranded by Spike) we can set the high and low temps maintaining optimal fermentation temps regardless of the ambient (basement) temps. I will never buy another fermenter with getting the temp control package.

Added To Cart

You are $150.00 away from free shipping Congratulations, you've got free shipping!